OneCNCXR8 Version release 63.22

We have released OneCNCXR8 Release 63.22

The major addition in this release is a change in the Mill Tool Holder dialog action.

Mill Tool Holders
The Mill tool dialog has been revised and updated mainly for the benefit of 5 Axis users in tool holder and head clearance checking.

The action of the tool holder editing action is now changed. The changes in the editing now allows the edit of the current holder settings.

OneCNCXR8 Version 63.22 is now available in the OneCNC update server for all licenced users.

OneCNCXR8 Version release 63.21 is now available in the OneCNC update server

These are the major changes and adjustments in this release

Lathe Groove Rough
Lathe Groove rough had adjustments to prevent gouge on bad geometry

Languages
Korean language was updated in this release
Japanese language was updated in this release.

Solidworks Import
Solidworks translation DLL was replaced in this release. This was preventing the Solidworks 2021 from loading.

Manual Pocket
The CAD Manual Pocket - inner boundary causes crash and this was adjusted

Preview
Preview leaving multiple empty layers in layer list

Lathe Turn Rough
Lathe Turn Rough - gouge caused by imported geometry has been improved to assist handling bad geometry

NC Manager
NC Manager did not refresh correctly on second screen and that has been corrected.

Mill Profile
Mill Profile - Finish overrides - RPM override was not posted correctly and adjusted in this release.

Colour Selection
Select by colour dialog was showing geometry colours from inactive layers That has been adjusted in this release.

IGES Translation
IGES translation had some adjustments in the INCH importation.

Max Tool Depth
Max Tool Depth in Job Sheet incorrect for Z Level toolpath was adjusted.

STEP Translation
STP import was adjusted and improved.

Wire EDM
Wire EDM output was incorrect if start point is at X0 Y0 and that is now adjusted.

OneCNCXR8 Version 63.21 is now available in the OneCNC update server for all licenced OneCNCXR8 users

OneCNCXR8 Version 63.20 is now released.

DXF import export
Many adjustments have been made in this version as an ongoing ubdate to the DXF file transfer in and out.

Mill Swarf
The 5 Axis simultaneous Swarf function has had some adjustments to better handle small arc type surfaces as found on junctions or corners on chamfered junctions.

STL Import
STL import has been adjusted to better handle STL imported files.

Mill Pocket
Mill Closed pocket function has had some adjustments to better handle by pocket by pocket and pocket by level.

Open Pocket
Open pocket is different than closed pocket and will only handle by level for multiple pockets.
For open pockets by pocket the Open Pocket boundaries are selected individually.

Lathe Rough Cycles
line numbers posted for lathe rough cycles in some cases is adjusted in this release to ensure correst line numbers for the cycles..

Languages
Japanese and Korean languages updates are included in this release

Lathe Rough
Lathe Turn Rough toolpath has been adjusted to prevent toolpath out of boundary moves

Lathe Finish
Lathe Turn Finish toolpath gouging was adjusted to prevent error at toolpath start,

Dimensions
Dimension line width prints but not shown on screen was adjusted in this release.

Special Note on OneCNC Licencing

OneCNCXR8 can be used without any connection to the internet.

OneCNC applications are designed to operate without web access to assist with complete data protection.

Updating OneCNC it is still simple using another PC that does have web access to download your updates..

Users can go to the OneCNC web using the dongle number and serial number to download the OneCNC Update then take it to the OneCNC PC to update.

This method allows you to have complete control of your manufacturing files not associated with the internet.

Combined with your OneCNC Perpetual licence assists in providing full digital dater protection. 

OneCNCXR8 Version 63.20 is now available to all licenced users from the OneCNC Update server.