OneCNCXR5 30.65 Was released and has the following changes.

There are 9 new language additions.

The Language changes are:

Danish
Dutch
French
German
Italian
Japanese
Korean 
Polish 
Turkish

Items that were not listed in the last update are:

Use ";" Heidenhain comments

OneCNC post now has a setting in the post  on the general settings page.
Tag this and all ( ) comments are replaced with ; this means that in heidenhain is is now possible to use the tool list function in the post to list all the tools in the head of the program.

Process Tool path Group

This now incorporates a setting called Table Load Move this can be used to insert a table loading position in the program when using the 3 axis re-position for example.

Graphics Display

An adjustment was made to better display large radius surfaces on models. This is part of the new loading adjustments for large files.

OneCNCXR5 Update 30.64 has a number of changes and updates.

OneCNCXR5 Milling Versions have a Major Function Addition.

This applies to:

 OneCNCXR5 Express
OneCNCXR5 Mill Advantage
OneCNCXR5 Mill Professional
OneCNCXR5 Mill Expert

The new functionality is 3 Axis Re-Positioning

This new functionality allows for programming the CAM section through the NC Manager on any plane without moving the part.

It is just a simple setting to turn Re-Position on then placing the plane on the face at the required orign for the programming to be automatically placed on the X Y Plane.

The new functionality allows for the the machining of all faces and provides full preview and simulation of the completed part. This is possible because all planes are machined as though they are on the XY default plane and all the preview and simulation is also applied similarly enabling the complete preview and simulation of the part.

The post has the automated ability to halt the machining process to enable the machine operator to flip or re-set the part for the next operation.

The following items apply to all OneCNCXR5 applications.

Job Sheet View and Output.

To assist users with laptops with low screen resolution the Job Sheet dialog has changed. The menu section now permits the use of the save and settings for those users. The PDF is created with multiple pages where required to view clearly all pages of information.

The PDF is saved by default to a PDF sub directory but the pathing can be configured by the user to a directory of choice.

Snap Masking of OneCNC automatic snap control

For users that are not fully accustomed to using the fully interactive automatic snap in OneCNC masking has been introduced for those situations. The masking is a one off mask to assist those users.

New Help File

A new help file is now in place with information up to and including the new features.

Image Quality Control

OneCNC in development with emphasis on speed of large files has been changing certain aspects of importing and processing due to this. In this update there is a change to better assist users to understand with automatic settings for the the viewing quality control versus the speed performance for large files.

There are some new additions changes and adjustments to this version and they apply to all versions of OneCNCXR5

New Feature for OneCNCXR5 Mill Expert
OneCNCXR5 Mill Expert now supports Slot Tools for undercut machining. This allows for a far increased undercut than the Lollypop tool which previously was the only tool automatically supported. This Slot tool ability allows for a sharp edged tool (both edges) or a edge radius tool (both edges radius) support.

New Feature for OneCNCXR5 Lathe Expert
OneCNCXR5 Lathe Expert Multi Axis now supports Slot Tools for undercut machining. This allows for a far increased undercut than the Lollypop tool which previously was the only tool automatically supported. This Slot tool ability allows for a sharp edged tool (both edges) or a edge radius tool (both edges radius) support.

Changes for all CAM versions of OneCNCXR5
There is a changed dialog for the Job Sheet to assist users using a low resolution laptop. This enables the control buttons to be accessed more easily.

Languages
New updated languages were introduced to support the lather functionality.

Windows 8
Adjustments were made for OneCNCXR5 to support the new Windows 8 operating system. It is not officially approved as yet for Windows 8 because the Windows 8 is not yet realeaed in the final version.

OneCNCXR5 Mill Manual
There is a new OneCNCXR5 Printed Version Mill Manual now available. Please contact your support office to receive your copy.

Other Adjustments
Other adjustments applied to Z level roughing, Z level Flat Machining,  Z level roughing and Z level Rest Roughing machining. These apply to ongoing tolerance adjustments.